Why can we use oil and alcohol_

In this article, we will examine the fuel consumption of the parking combustion heater. In general, what fuels do parking heaters work with?

parking heater fuel consumption

As the name suggests, diesel heaters work with diesel. However, diesel is not the only fuel they can use. Many heaters can use kerosene, a mixture of diesel and a quarter of alcohol in very cold weather. This is an important point for maintenance and ease of use.

The fuel consumption of the parking combustion heater

for example:

If your car runs on gasoline and not diesel, you may want to get a heater that you can use a separate tank to fuel the heater instead. Or you can use kerosene as fuel for your heater.

In addition, another fact to consider is maintenance. Diesel is a heavy fuel that leaves a lot of waste in the form of carbon. To counter this, diesel heaters (in place) require regular and thorough cleaning to ensure proper performance. Kerosene, on the other hand, is a much lighter fuel and leaves very little residue.

The fuel consumption of the parking combustion heater

So, if you particularly hate doing maintenance, it’s better to buy a Dejai heater that also has the option to run on kerosene. Therefore, we recommend that you thoroughly consider your circumstances and preferences before deciding which fuel you want to use in your heater. After doing this, you need to get a model of deja heater that supports your chosen fuel type.

Checking the fuel path of the parking heater

The main fuel of the parking heater is kerosene.

But if you are not sure about the quality of the desired oil, you can use high-quality diesel.

The presence of water and other impurities in the heater fuel can cause the formation of soot inside the heater and lower the temperature of the heater, or in more severe cases, the flame cannot be formed inside the heater.

The use of oil thinner and fuels specific to other heaters is prohibited for this heater and it causes soot formation.

When using diesel, especially in cold and frosty winters, if your heater has its own separate tank, in order to prevent the fuel from becoming jelly and also to increase the quality of the fuel, it is better to use ¾ tank of diesel and ¼ tank Use white alcohol.

parking heater fuel path

Install the fuel supply path in such a way that the fuel temperature does not exceed 30 degrees Celsius to prevent the formation of fuel bubbles inside.

How much fuel does the parking heater consume?

All parking heaters are equipped with piston fuel pumps to inject fuel into the system. These pumps are designed for oily fuels such as diesel and kerosene and have a constant volume of pumped fuel in each circle. It is called pulse in parking heaters and is used as the main setting for power modes. Pulse is measured in Hertz and indicates the number of pump cycles per second.

The volume of fuel pumped is typically between 0.020ml and 0.023ml and can be found on the pump itself or in the manual. To find consumption for each power mode, you must use the pump volume and multiply by 60 for consumption per minute or 360 for consumption per hour.

In this table, you can find the consumption of a typical in-place heater of 2 kW per minute and per hour for each mode.

Checking the fuel path of the parking heater (1)

Checking the fuel path of the parking heater

Considering the arrival of autumn season, pay attention to this point that before turning on the heater, look at the fuel path, apart from the possibility of rotting of the connector hose and the possibility of garbage in the path, and the foreign object inside the hose is possible. The fuel hose is installed.
When you turn on the heater, this foreign object either gets stuck in the pump or in the nozzle inlet. The amount of fuel flow that it wants to reach means 200 cc per minute, it does not reach the heater and the heater cannot be turned on.

So please disconnect all the connectors before turning on the heater and clean it with wind. After making sure it is clean, re-establish the connections and start.
There is no need to use anything to ventilate the fuel, the heater itself is started 3 or 4 times to ventilate the fuel supply path.

How much does an parking heater work on a gallon or a liter of fuel?

Using the consumption table above, you can easily calculate how long you can run your heater with a full tank or leave fuel in the tank and adjust accordingly. Diesel heaters usually come with 10-liter or 2.64-gallon tanks, which last very long with low consumption. It is very easy to calculate how long a gallon of fuel will last in any power mode.

A 2 kW diesel heater works for 26.25 hours with one gallon of fuel, and in low-consumption mode with one liter of fuel, it works for about 7 hours. Here is a consumption comparison table for all power modes of a 2 kW Chinese diesel heater.

Why can we use oil and alcohol?

Because diesel fuel is provided at a temperature of -18 degrees Celsius and does not cause a flame or the heater to turn on, it is appropriate to mention that all the fuels that are sold in the market as fuel for parking heaters only cause the parking heater to fail. And the best fuel for the heater is only the fuel we told you about in this video.
As the winter season approaches, many companies face the possibility of freezing or near freezing in their trucks. Without a way to keep the temperature warm and comfortable, trucks can become almost idle.

parking heater fuel path

last word

Fortunately, this is a known problem and there are solutions on the market. For example, take parking heaters. These nifty little machines are built with trucks and cars in mind and are specifically designed to help them endure more winter.

Forozesh Pakhseh Company has a variety of parking heaters for all truck drivers and other vehicles that need parking heaters.

In most cases, the fuel used for the parking combustion heater is kerosene and kerosene.

Call the following numbers for purchase and consultation.

factory phone :

02637775380 0263777538002146115372